Over the past 8-10 years, I have done a lot of fieldwork. This means that I have designed a lot of field experiments, and as such I have also dealt with a lot of planning, anticipating and building/purchasing of fieldwork-related equipment. This also means I have done a lot of tweaking, troubleshooting and repairing in the field. I am a firm believer that fieldwork operates under Murphy’s Law: “Anything that can go wrong will go wrong”. Murphy’s Law, of course, just doesn’t apply to fieldwork, I am most certain it applies to all work, or perhaps even life in general, but for many reasons fieldwork is more sensitive to things going wrong, and for a couple of key reasons.
1) Most fieldwork is done far enough away from civilization that running to the hardware store just simply is not an option. This means that creativity and resourcefulness are two of the top qualities needed in field biologists.
I remember when the latch on the driver’s door of the field van just mysteriously stopped working. The door would simply not stay closed. We still had over an hour to drive home, and we were not letting this silly door stop us. One of the girls working in the field, Sarah, took her belt right off her pants, and looped it around the handle on the inside of the door. I sat behind her and held on for dear life as we flew down the windy country roads hoping that the belt would not slip and cause the door to fly off… or Sarah to fly out… or any other hideous disasters. We survived and made it back in one piece. It ended up being that the lock was just jammed and it was an easy fix…oh, life’s lessons!
Another time, I was building cages out of fencing for a herbivory treatment and had arrived very prepared with rabbit clips, and the special pliers to clamp them on. Quickly, I realized that this plan was not going to work. The pliers were too big to fit through the holes in the fencing. Luckily, between tape from the First Aid kit, Zip ties from the floor of the van, and a package of twist ties, we made it work! FIVE years later, those cages are still holding strong! Originality in the field is key!
2) Most fieldwork experiments are put in place with very little control over what happens. You can plan and anticipate until you are blue in the face, but there is always something you miss, and for years after you might think, “what if I had just…”
During my Master’s I was working on an experiment where I isolated target plants to obtain their maximum potential body size, in the absence of competition. We carefully chose plants, tagged them, cleared all the neighbouring plants, placed straw on the ground as mulch, and caged them with cages 1 metre in height to prevent deer grazing. We had thought of it all! Nothing could go wrong…WRONG! Not only did the entire field flood (that’s for another story) but we realized that it’s harder than we thought to outsmart a deer. While we had caged only 5 buttercups in an entire field filled with hundreds of thousands of buttercups, the deer wanted the ones in the cage. And they did anything they could to get the ones in the cage. They would pull cages up using…I don’t quite know, maybe their faces, or their front limbs…there was lots of hair stuck to the fencing to suggest they used some body part to lift them up. They also tried lying down on the cages or pushing them over just enough so that they could grab hold of and tug my precious sample right out of the ground. As frustrating as this experience was, I can only look back on it and laugh at the persistence of those pesky deer.
These are only a couple of examples of how Murphy’s Law is very applicable to fieldwork and field biology. If you have some stories about Murphy’s Law and your fieldwork, shoot us an email at email@example.com!